Ubiquiti airMAX NanoBeam AC 5GHz Gen2


SKU: UBQ24083 Category:
Ubiquiti airMAX NanoBeam AC 5GHz Gen2

The Ubiquiti NanoBeam is the powerful second generation airMAX from Ubiquiti Networks. It is the successor to the Nanobeam AC and is an access point and antenna in one. It features a compact and industrial design and is excellent for CPE deployments.

The NanoBeam includes a WiFi radio for direct pairing with a smartphone or tablet. The UMobile app makes it easy to control the device remotely.

The Wall Mount Kit allows the airMAX NanoBeam to be easily and quickly mounted on the wall.

  • AirOS 8
  • Access point and directional antenna in one
  • With WiFi radio for pairing with mobile device
  • Remote management with UMobile app
  • Less sensitive to environmental interference
  • Maximum transmitting power of 26 dBm
  • WiFi 802.11ac standard at 450 Mbps
  • 2x Gigabit LAN port with PoE for network and power supply
  • Easy mounting, including mast brackets
  • Dish diameter: 189mm


Ubiquiti airMAX NanoBeam AC 5GHz Gen2

Outdoor Access Point

The Ubiquiti NanoBeam Bridge is a compact, UISP-ready, 5 GHz WiFi access point with improved surge protection and an optimized radio and antenna. The antenna of this model transmits a more focused signal and is therefore even better able to filter out interfering environmental signals.

Enhanced Features

The streamlined NanoBeam design with proprietary airMAX ac chipset is great for setting up a point to point WiFi connection. The separate WiFi radio provides a link to the UMobile app on a cell phone or tablet. Via the UMobile app (iOS and Android) the device can be easily managed and configured remotely.

PoE Management

The Ubiquiti Nanobeam AC Gen2 features 2 Gigabit LAN ports with Power over Ethernet (PoE) support (PoE injector 24V, 0.5A PoE required). This allows the unit to provide both power and network connectivity via the network cable, which is ideal for locations where an electrical outlet is not available. The dish has a diameter of 189mm and can be adjusted as desired. The integrated LEDs allow the signal strength to be read and thus the best position for the device to be determined. A bracket for mast mounting is included as standard.

Plug and Play

The NanoBeam AC can be mounted on a variety of surfaces, including poles or walls, and offers the freedom of three-axis alignment. A bracket for mast mounting is included as standard. The Wall Mount Kit for wall mounting is not included.



  • Dimensions: 189 x 189 x 125 mm
  • Weight: 530g
  • Network Interface: (2) 10/100/1000 Ethernet Port, Wi-Fi for Management
  • Housing: Outdoor UV Stabilized Plastic
  • Maximum power consumption: 8 W
  • Power supply: 24V, 0.5A Gigabit PoE Adapter (included)Ubiquiti airMAX NanoBeam AC 5GHz
  • Wind load 45.4 N at 200 km/h
  • Survivability by wind 200 km/h
  • Certificates: CE, FCC, IC
  • Mounting Pole mount (included)
  • Wall mount (not included)


What’s in the Box

  • Ubiquiti Nanobeam NBE-5AC-Gen2
  • PoE injector
  • Pole Mounting Kit
  • Manual


Supporting Documents