Poynting XPOL-2-5G

197,00

SKU: A-XPOL-0002-V3-03 Categories: , ,
Poynting XPOL-2

The Poynting A-XPOL-0002 – 5G is the successor to the popular XPOL-002 and is Poynting’s third generation “V3” of this popular Cross Polarized (XPOL) series.

The antenna housing looks the same as the second generation “V2”, but has been completely redesigned inside. Poynting has adopted advanced materials technology, using so-called Artificial Magnetic Conductors (AMC) and new registered and patented configuration that delivers exceptional improvements in frequencies and gain. The radiation patterns of this antenna are exceptionally well regulated, which further increases the antenna performance.

Key Benefits
  • 2 × 2 MIMO 4G / 5G antenna
  • Backwards compatible with 2G / 3G / 4G / LTE networks
  • Up to 11 dBi amplification of the signal
  • Suitable for outdoor use
  • Including 10 meter low loss cable with SMA-male connection
  • Including mounting material

Description

Poynting XPOL-2-5G

Omnidirectional antenna for 5G, 4G, 3G and 2G

The Poynting XPOL-2-5G (A-XPOL-0002-V3-03) is a powerful omnidirectional antenna that can handle the current cellular bands in the 5G, 4G, 3G and 2G networks.

New 5G frequencies and better gain

The XPOL-2-5G antenna contains the 3400-3800 MHz bands. This antenna performs exceptionally well in the following frequency bands: 698 – 960 MHz, 1700 – 2170 MHz, 2300 – 2700 MHz and 3400 – 3800 MHz. In addition to the new bands, the gain in the 1700 MHz and 2.7 GHz is about 3dB higher than the “V2” over the same frequency band.

MIMO technology for maximum speed: 2 antennas in 1 housing

MIMO stands for Multiple Input, Multiple Output. A MIMO antenna has 2 specially assembled antennas in 1 housing. The 2 antennas can both transmit and receive, so you can optimally use the capacity of the transmission channel. Different data streams can be transmitted over the different transmit and receive antennas.

This Poynting XPOL-2-5G antenna has 2×2 MiMo so that multiple connections can be set up and maintained simultaneously.

Channel capacity cleverly used by MIMO

MIMO makes smart use of the fact that the channel capacity varies from time to time and from place to place. With 2 transmitting and receiving antennas in one (MIMO) you will always have a better result than with 1 transmitting and receiving antenna (SISO: Single Input, Single Output).

Built-in cables of 10 meters: no loss or interference of the signal

Because the cables are integrated in this antenna, there is no connector transition and therefore no loss of the signal or risk of interference due to moisture, for example. Capestone supplies this 5G antenna from Poynting with 10 meters of cable as standard. The antenna is also available with 5 meters of cable.

Futureproof antenna

This futureproof 5G antenna can also provide coverage for many of the future wireless bands due to its special design. This makes the XPOL-2 a very cost effective antenna.

Requires two external antenna connections

This Poynting XPOL-2 5G antenna is suitable for routers with 2 external antenna connections.

poynting-xpol-2-5g

Specifications

  • Weather and wind resistant thanks to IP 65 rating.
  • 5G antenna and also suitable for 4G, 3G and 2G.
  • 2×2 MiMo
  • 5G frequencies: 3400 to 3800MHz
  • 2G / 3G / 4G frequencies: 698-960 MHz | 1710-2700 MHz
  • WiFi: yes on 2400-2500 MHz
  • Cable: 2 x 10 meter Twin HDF 195 with SMA male connections included
  • Mounting: mounting bracket for wall, pole, mast included
  • Weight: 1.73KG

 

What’s in the Box

  • A-XPOL-0002-V3-5G Antenna Only
  • M6x60mm U-Bolt ss
  • Econo Bracket ss
  • 2x M6 Nuts ss
  • 4x M6x12mm Bolts ss
  • 6x M6 Washers ss
  • Z-Bracket
  • Backing Plate

 

Supporting Documents

Datasheet

You may also like…

Poynting A-XPOLTeltonika 003R-00254